Bamboo Shades

Bamboo Shades in Lawrence, IN With Lawrence Window Treatments

Real weave, real light through it, liner optional

Call (317) 999-5154Get Free Quote
Quick Answer

Quick answers on this service. What it suits, what it costs to run, how it gets measured and where it falls short. If something below rules it out for your room, that's useful information before you order.

  • Service: Bamboo Shades for Lawrence homeowners
  • Service area: Lawrence, IN and surrounding areas
    • The measure is bookable soon. Fabrication is the fixed cost in time, generally two to five weeks and longer on specialty shapes. If you have a date you're working toward, tell us at the measure and we'll be straight about it.
  • Insured and bonded
  • Serving Lawrence, IN since 2008
Bamboo Shades Services

Expert Bamboo Shades for Lawrence Homes

Bamboo shades read as warm and natural, and the southern quarter of Lawrence is where they land most often. The Traditions and Peach Tree Cove streets sit between 46th and 52nd Streets east of Mitthoefer Road, with English Oak Drive, Hickory Leaf Road, Amber Wood Drive and Burrwood Drive naming the tree side and Redhaven Drive and Clingstone Court naming the peach cultivars residents actually use. Everything here is squared to the section grid, so front and rear elevations face broadly north and south while the side elevations take direct low sun from the east in the morning and the west after four. That repeating geometry means a decision made on one house repeats on the next.

Every bamboo weave passes light. That's worth reading twice, because the sample on a counter looks solid and the shade on a window doesn't. Unlined bamboo is a light filtering product regardless of how tight the weave appears, and after dark a lit room shows shapes through it from the street. A liner fixes that and takes away some of the texture you bought the shade for, adds weight to the lift, and adds cost. Natural fiber also moves with moisture, and central Indiana runs muggy from 25 May to 22 September, so keep bamboo out of baths and away from a range.

When to Call

Signs You Need Bamboo Shades

If you notice any of these in your Lawrence home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

A long lift cord hangs beside a heavy woven shade

You can see straight in after dark

A bedroom wants the weave and still has to go dark

A sunroom needs texture more than darkness

A screened porch reads unfinished

An old natural was cleaned wet and never recovered

Sun-facing shades have lightened next to the others

Bare windows look cold against wood floors

The weave over the tub has gone wavy

Store-bought matchstick shades have started to sag

Our Process

How Lawrence Window Treatments Handles Bamboo Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Stack depth figured on the weave

2

Custom build, two to five weeks

3

Material named on the quote, not just bamboo

4

Blackout layering priced as an option

5

Water warning given and written down

Real Project Photos

Bamboo Shades in Lawrence

Photographs from real bamboo shades jobs completed by our crew in Lawrence and surrounding areas.

Custom shades measured and installed in LawrencePlantation shutters fitted to a Lawrence windowCellular shades in a Lawrence living room
Scope of Work

What Bamboo Shades Includes

Every Lawrence job is documented item by item. Here is what the crew covers.

The light question settled before anything else: every bamboo weave passes light, and the only cure is a liner

A sample held against your own glass in daylight so you can see exactly how much comes through the weave

Liner decided window by window and written on the order, none, a privacy liner or a room darkening liner

The liner shown behind the weave before you commit, since it flattens the texture you are buying the shade for

Cane cut and weave chosen deliberately, from a coarse split cane to a fine matchstick

Color read as a natural range rather than a single value, because bamboo is a harvested material

Every shade for one room ordered together so the material comes off the same run

Stack depth figured on the actual weave, since bamboo bundles far deeper than a rolled fabric of the same drop

Where that stack lands checked against the glass, so you know what the shade covers when it is fully raised

Three widths and three heights taken per opening with a diagonal, because a natural weave shows an out-of-level hem plainly

Mounting depth measured for a headrail carrying bundled material rather than a flat roll

Edge banding specified wherever a cut edge would ravel or read unfinished against painted trim

Valance depth chosen so the headrail is genuinely covered instead of half shown

Lift matched to the finished weight, since a wide lined natural is heavier than people expect

Products specified to conform to ANSI/WCMA A100.1-2022 for cord access, with cordless in rooms children use

Openings inside shower spray or directly over a cooktop moved to a different product at the measure

A written agreement carrying the scope, the dates and the price, as IC 24-5-11 requires above $150 of residential work

Folds dressed by hand and the shade cycled on install day so the material learns to stack evenly

Pricing

What Bamboo Shades Cost in Lawrence

Published national ranges run about $60 to $600 per window for stock shades and about $250 to $2,600 for custom-fabricated ones. Treat those as national category figures rather than a price for a room in Lawrence. Bamboo covers a wide part of that band. A simple split cane on a small opening with no liner is inexpensive. The same weave with a room darkening liner, edge banding and a deep valance on a tall window is a different purchase, and the liner is the line item most people have not budgeted for when they walk in. Width and drop then do what they always do, and a lined natural on a wide opening carries real weight, which affects the lift we specify. Lawrence Window Treatments prices from measured openings around Marion County with the liner settled before the number is written.

By Product

How Bamboo Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

Split cane bamboo: Bamboo halved lengthwise and woven with string, which gives the strong horizontal line most people picture. The gaps between canes are where daylight and nighttime sightlines get through, and that gap is a design feature rather than a flaw.

Matchstick weave: Fine round sticks woven tight, so the face reads much smoother and finer than split cane. It packs closer, which holds back a bit more daylight on its own, and it suits a formal room where coarse texture would look out of place.

Carbonized bamboo: Bamboo darkened by heat treatment rather than by stain, which is why the color runs through the cane and looks deeper in person than in a photo. It reads warm against white trim and it varies naturally from piece to piece.

Bamboo with reed or grass: A mixed weave with bamboo carrying the structure and reed, jute or grass adding a finer secondary texture. It looks less uniform than a single-material weave, which is exactly the appeal, and it makes matching a later order harder.

Privacy liner: A light filtering liner sewn behind the weave, so the room stays bright and nobody sees in during the day. It's the liner most people actually want, and it changes the look from inside by muting the texture the weave provides.

Room darkening liner: A dense liner that takes a bedroom to genuinely dim. It's the only honest path to darkness in this product, and even then the edges of an inside mount still pass light, so a bedroom that must be dark needs an outside mount too.

Edge banding: A finished band applied along the cut edges of the weave. It stops a raw edge from raveling over the years and it gives the shade a deliberate outline against painted trim, which matters more on a coarse weave than a fine one.

Valance and decorative headrail cover: A band of the same material covering the headrail and the top of the stack. Without one you see hardware and the top of the bundle. Depth matters here, since a shallow valance on a deep stack hides half of what it should.

Cord loop with a tensioner: The control that handles weight best, which counts on a lined natural. The tensioner has to be fastened to the wall or the frame rather than left hanging, and we install it as part of the job rather than leaving it in the box.

Top-down bottom-up on a natural: Two rails so daylight can come over the top while the lower glass stays covered. On a heavy woven material it adds hardware and weight, so we check the finished size against the manufacturer's limits before writing it on the order.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Lawrence room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Bamboo Shades FAQ

Questions we hear most often from Lawrence homeowners considering bamboo shades.

Bamboo is one material within the woven wood family rather than a separate product. A bamboo weave uses split bamboo slats, often with a fairly regular width and a harder surface, so it hangs stiffer and rolls or folds with more body. A general woven wood may mix reeds, grasses and jute, which gives softer texture and a looser, more irregular face. Bamboo tends to be the more uniform of the two and the easier one to match across a room. It's also usually the heavier, which matters on a wide English Oak Drive opening once you get to the lift mechanism.
You need one anywhere privacy after dark matters, and it costs you three things. It adds material cost. It adds weight, which pushes a wide shade toward a heavier lift or a motor. And it changes the look, because the liner sits behind the weave and mutes the daylight glow that made bamboo attractive in the first place. A privacy liner still passes some light. A blackout liner doesn't, and it makes the shade noticeably thicker in the stack. In a Peach Tree Cove bedroom on a north facing front elevation we usually line. In the living room we usually do not.
Outside mount, more often than not, and the section grid between 46th and 52nd Streets is the reason. Those side elevations take low direct sun from the east and again from the west, and low sun comes in at an angle that walks straight past the edge of an inside mounted shade no matter how well it is cut. Mounting outside and above the opening, with the shade wide enough to overlap the trim on both sides, kills that edge light in a way an inside mount cannot. It also solves the depth question on any opening where the jamb is shallow. The cost is that you cover your trim.
Both, with weight as the limiting factor. Bamboo is heavier per square foot than most shade fabrics, and a cordless lift depends on a spring balanced against that weight, so the wider and taller the shade the harder the spring works and the sooner it fades. Add a liner and the problem grows. On a large opening we usually recommend a motor rather than fighting a spring, and Hunter Douglas puts PowerView battery life at about a year, which is the running cost to plan for. On a modest bedroom opening a cordless bamboo shade behaves perfectly well for years.
They behave like any lifting product on a door, which is to say you'll operate them constantly. The shade has to clear the door head before anybody walks through, and bamboo is heavy enough that a manual lift on a wide door is a two hand job. There is a second issue specific to the material. A bamboo shade raised and lowered many times a day works its cord routing harder than a fabric shade does, because there is more mass moving. On a Redhaven Drive patio door in daily use through summer, a panel track or a vertical treatment will outlast bamboo and annoy you less.
It'll change color, and that's normal rather than a fault. Natural fiber shifts tone under sun, generally lightening on the exposed face over a few seasons, and a shade that spends its life down on a west elevation will move further than one on a north room. A UV-slowing liner reduces the rate without stopping it, because NFRC puts ultraviolet light at only 40 to 60 percent of fading damage and the rest arrives as visible light and heat. Order a whole room at once and it ages together. Add one shade to that room three years later and the new one will look new.
Less than you expect, and this is the disclosure that matters most on this product. Bamboo is a woven material, which means it is made of pieces held together by string, and light comes through every gap in that weave. A tight matchstick holds back more than a coarse split cane, and neither one gets close to a fabric shade. Held against a bright window you can see daylight through the whole face. That's not a defect, it's what a woven natural is, and it's why the liner conversation happens first.
Almost everything except the view from the street. A privacy liner sewn behind the weave stops people seeing in during the day and keeps the room bright. A room darkening liner takes it much further. The tradeoffs are worth hearing: the liner flattens the texture you liked when you looked at the sample, since you're now seeing the weave against a solid background rather than against daylight, and it adds weight, which changes what lift makes sense. We hold the liner behind the sample in your room before you decide.
They can get a bedroom genuinely dim with a room darkening liner. They can't seal it. The liner handles the face and the edges are still open, so an inside mount passes light down both sides the way every inside mount does. Lutron publishes 3/4 inch per side as a real figure on their roller product, which gives you the scale of it. If the room has to be dark, we mount outside the opening with real overlap, or we pair the natural with a blackout shade behind it and let each do its job.
No, and people are often surprised by how much so. During the day it's brighter outside, so an unlined weave reads as texture from the street and you feel private. After dark with lamps on, that reverses completely, and someone outside sees through the gaps in the weave far more clearly than you would guess from inside. On any window facing a street, a sidewalk or a neighbor's house in Lawrence, we treat a privacy liner as part of the product rather than as an upgrade.
Closely, never identically, and that's the nature of a harvested material. Bamboo varies in color and diameter from run to run, and a shade made this spring can sit visibly warmer or cooler than one made last fall. Fabric has dye lots and bamboo has something broader than that. The practical rule is simple: order every opening in a room on one purchase, including the small ones. Adding a window later is the situation where this becomes obvious rather than academic.
More than a fabric shade, and it's worth seeing before you order. Bamboo doesn't roll flat, it bundles, so the raised material sits as a deep stack at the top of the opening. A lined shade stacks deeper still, because the liner folds along with the weave. On a short window that stack can eat a real share of the glass. We measure the drop, estimate the stack against the actual weave and tell you where the bottom of it will land.
In a powder room, yes. Inside the spray of a shower, no. Bamboo is a natural material and it responds to moisture the way natural materials do, which through the muggy stretch from late May into September in Marion County means it can swell slightly and the weave string can relax. A window across the room from a shower is fine. A window over a tub is asking for a shade that goes wavy and stays that way. Over a cooktop is a separate problem, since cooking oil in the air settles into a weave and won't come out.
It will change color, and on naturals that shift is more visible than on fabric. Bamboo lightens with sun exposure, so a shade on a south or west window in Lawrence will be a slightly different tone in five years than one in a north bedroom ordered on the same purchase. Some people like it and read it as the material aging. Either way, closing the shade through the worst of the afternoon slows what happens to the floors and furniture behind it, since NFRC attributes roughly 40 to 60 percent of fading to UV. It reduces the damage rather than ending it.
On smaller shades, comfortably. On a wide lined natural, the honest answer is that a spring has a lot of weight to hold and the lift stops feeling good. Cordless is what we specify in rooms children use, since there's no operating cord on the product, which is the direction the ANSI/WCMA A100.1-2022 work on cord access points. Where the weight is genuinely too much, a motor is a better answer than putting a long cord back into a child's room, and we'll price both.
Dust it and keep water away from it. A vacuum on low with a soft brush head, run in the direction of the weave, is the routine. A feather duster works for a light pass. Don't wet the material, because water swells the fiber and can stain the string, and don't use any cleaner with solvent in it. If a lined shade gets marked on the liner side, treat that as a spot job with a barely damp cloth and accept that the weave itself is not washable.
It's a finished band applied along the cut edges of the shade. A woven natural is cut to your width, which leaves a raw edge where the strings end, and over the years that edge can ravel or simply look unfinished sitting against painted trim. Banding closes it. On a coarse split cane it makes a real visual difference. On a tight matchstick you can often skip it. It's a small cost and it's one of the details that separates a shade that looks made from one that looks cut.
They hang similarly and they behave differently. A fabric Roman gives you exact color, a lining that can be genuinely opaque, and folds that stay where you dress them. A bamboo shade gives you texture and light that no fabric imitates, plus a material that varies from shade to shade, and it needs a liner to do the privacy work a fabric can do on its own. If the room is about the texture, bamboo. If it's about color matching and darkness, fabric.
They can be, with the lift specified correctly. Cordless removes the operating cord entirely, and inner-cord non-compliance is treated as a substantial product hazard under 16 CFR 1120.3. The second consideration is the material itself: a woven natural at toddler height gets picked at, and a pulled string is visible and awkward to repair. In a nursery we often hang them and mount them high with an outside mount so the bottom of the shade sits above where small hands work.
Two to five weeks in the usual custom fabrication window, with lined shades and anything top-down bottom-up running toward the longer end. The weave is cut to your width, the liner is sewn in and the edges are banded, all to your measured sizes. You'll have that window in writing with the scope, the dates and the total price, which the Indiana Home Improvement Contract Act requires on residential work over $150.
Areas We Serve

Bamboo Shades Across Lawrence

We measure and install in every one of these Lawrence neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Lawrence

Lawrence Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Lawrence

Composite slats sized for Lawrence drywall returns

Learn more →

Wood Blinds in Lawrence

Basswood for the rooms with real trim

Learn more →

Vertical Blinds in Lawrence

Door wall coverage that stacks where you walk

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Lawrence

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Lawrence, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 999-5154
Service area

Serving Lawrence and the surrounding area

Call NowGet Quote